Help with IOS 3600 router has no IOS boot in ROMMON

[loveroots]

Hi expert.I was giving a 3600 router but I can not seem to get the IOS loaded. I have perform the below steps how could I get IOS loaded.

rommon 1 > set
PS1=rommon ! >
BOOT=
?=1
BSI=0
RET_2_RTS=00:34:30 UTC Mon Mar 1 1993
RET_2_RCALTS=
rommon 2 > IP_ADDRESS=172.24.100.126
rommon 3 > IP_SUBNET_MASK=255.255.255.0
rommon 4 > TFTP_SERVER=172.24.100.59 == my pc ip tftpserver
rommon 5 > DEFAULT_GATEWAY=172.24.100.1
rommon 6 > TFTP_FILE=c3620-jk9o3s-mz.122-29.bin
rommon 7 > dnld
~timed out waiting for data - aborting
!rommon 8 > dnld
~timed out waiting for data - aborting
!rommon 9 > tftpdnld

monitor: command "tftpdnld" not found
rommon 10 >

 

[burtsbees]

You did it right, but do not do dnld at all---it always says "command not found" when you do tftpdnld after "dnld"---if you had hit enter a few times then done tftpdnld again, it would have worked.

Also, make your gateway the tftp server (same), as they are in the same subnet.

Also, are you sure this is a 3620?

/

tim@tim-laptop ~ $ sudo apt-get install windows
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package windows...Thank Goodness!

 

[loveroots]

Hi expert tftpdnld is not one of the options on this router when I did ? only dnld. I am now trying the xmodem. I could not get the 115200 to work and just settle for 9600 baud rate. It will be done in 4hr hopefully it works

 

[burtsbees]

Why not?

rommon1>confreg 3922

Set the terminal emulator to 115,200.

I have a 3640, and it does tftpdnld just fine. It did not recognize tftpdnld because you tried "dnld" first. If you tried hitting enter a few times then tried "tftpdnld" again, it would have worked. There was an extra up, down or space character that rommon was reading, but you did not see it. That is why it did not recognize the command. The bootstrap program is quirky like that!

/

tim@tim-laptop ~ $ sudo apt-get install windows
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package windows...Thank Goodness!