Help with Intenet Sharing

[muzotech]

Hi,
I've installed win2000 Server where I'm using a cable modem the server have two NIC's one is the LAN & the other one is the cable modem now I have a lot of problem sharing the internet with the Clients the server have internet before I've used intenet sharing CIS now I need to used RAS instead but I've try it seems not to work because I don't know How to do the configuration Couls someone Help me

P.S I have DHCP unable I'm not using router the cable is connected directly in the server The LAN is working fine except the internet I cannot share .

 

[Wirdo]

Ras is for authentication not for ICS.

 

[Seaspray0]

RRAS can do it... you must install the NAT protocol in RRAS. In the NAT protocol, you must define a public interface and a private interface. Allow NAT to resolve name service requests for your network (will act like a DNS). Add a static route to the public interface 0.0.0.0 with subnet 255.255.255.255. If you have a dhcp server, do not allow NAT to assign ip addresses, let it point to the dhcp server to do this. For your clients, add the server with RRAS/NAT to the dns to the dns list; can use dhcp to do this for you.