Hi expert I am task with setting up a network with dual communication failover only. I will not be able to have dual equipment failover please provide me a sample network design and config I would need to use all equipment I have to use only the equipment in file as this all we will be purchasing one 2851, one asa5510, thre 3560 switch
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Help with failover design and config
- Thread starter loveroots
- Start date
the best you'll be able to do redundancy wise with that gear will be to enable IP routing on two of the 3560's and run HSRP. You will have a single point of failure with the 5510 as well as the 2851.
I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)
I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)
- Status
