Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help with AUD017, AUD018 and TFS501

Status
Not open for further replies.

cevamisto

Technical User
Aug 10, 2004
39
RO
HI,

I have an CallServer 1000E Rls 4.0 and on CS1000T console i have this messeges very often and i don't know who to escape this messeges.

"AUD017 00000064 00000001 0000FFD6 0000FFDE
AUD018 00000064 00000001 0000FFDE 0000FFFE
AUD018 00000064 00000002 0000FFE6 0000FFFE
AUD017 00000064 00000001 0000FFDE 0000FFFE
AUD017 00000064 00000002 0000DFFE 0000FFFE
AUD017 00000065 00000002 00007EEE 0000FFEE
AUD018 00000065 00000002 0000FF9E 0000FFFE
AUD017 00000068 00000002 0000BECA 0000FFFE
AUD017 00000069 00000002 0000D56A 0000DF7E
AUD018 00000069 00000002 0000FD7A 0000FFFA
TFS501 100 2 0
TFS501 101 2 2
TFS501 104 5 0
TFS501 105 4 2"

Can somebody help me pls?

Thanks
 
The AUD017 is Network even map not the same as the Network even audit map. Map is updated to match. No action required. Output: Loop, Network even map, and network even map audit. AUD018 is the same but Odd Map. the TFS501 is Audit, ld 44, found time slot X on a loop incorrectly identified as busy. The time slot is idled. If this is happening every night during MID's there may be a patch for this. Check with your vendor.
 
Hi,

Sorry for delay, but the AUD messages appears at 2 minutes interval all day long.

"TFS501 100 2 0
TFS501 101 2 2
TFS501 104 5 0
TFS501 105 4 2"

100, 101, 104 and 105 are the loops for TNs for virtual trunks between CS1000T and CS1000E.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top