Help with a M7310 Set

[raavenhawk]

Ok. I've read enough documents on how to answer a phone or forward to another phone. Can someone please tell me how to assign a Line ID to a phone. I did this once but cannot remember what the feature code was to assign a specific Line ID to a specific phone. I don't need to set pools, forwarding, or the like, just need to set a specific Line ID to a Norstar m7310 set. Thank you in advance!

 

[fireeater]

with out know you system and software level it hard to say

but will give for newer systems


feature **config
(password)
display shows terminals and sets
press show
dial dn number
display should show line access
press show
dial line number
change to appear and ring or just appear

that should get you going

HALLOWED ARE THE ORI

mike

http://www.ics-on.ca