To anyone who can assist me to get rid of thsi nightmare!
I have seen a problem that I still can not find any solution for it . It is under 5350 ONLY.
When we have two carrier and carrier number one could not terminate the call by any reason and Carrier number two terminate the call, after the call has been finished, I have two START/STOP signal from the router side with the same Prefix of Carrier number 1. I am sure that call is terminating on carrier number two, but the STOP signal shows that call terminated at carrier number ONE. It seems that information for START/STOP will repeated for carrier number two. Any one have any idea.
in below example, call can not terminate at dial-peer 111, and will go to dial-peer 222 and will terminate. but the STOP signal shows the destination number as 11101144...... instead of 22201144....
even the h323-remote-address=198.198.104.1
is correct , I mean it shows the second carrier ip address, but the destination number ( Called-Station-Id ) is not correct.
I have tested this thing, on 3 different 5350 and different IOS, 12.2 and 12.3 . Result is the same. But the same config undser 5300 working well !!!
any one can help me?
here is the relative config,
aaa authentication login h323 group radius
aaa authentication login telnet local
aaa authentication login voip group radius
aaa authorization exec h323 group radius
aaa authorization exec telnet if-authenticated
aaa accounting send stop-record authentication failure
aaa accounting exec default start-stop group radius
aaa accounting connection default start-stop group radius
aaa accounting connection h323 start-stop group radius
aaa accounting connection voip start-stop group radius
gw-accounting aaa
acct-template callhistory-detail
radius-server host 192.168.1.20 auth-port 1845 acct-port 1846
radius-server retransmit 1
radius-server key 5555
radius-server authorization permit missing Service-Type
radius-server vsa send accounting
radius-server vsa send authentication
translation-rule 111
Rule 0 ^01144 11144
dial-peer voice 111 voip
preference 1
destination-pattern 01144T
translate-outgoing called 111
session target ipv4:200.200.102.2
dtmf-relay h245-signal h245-alphanumeric
translation-rule 222
Rule 0 ^01144 22244
dial-peer voice 222 voip
preference 2
destination-pattern 01144T
translate-outgoing called 222
session target ipv4:198.198.104.1
dtmf-relay h245-signal h245-alphanumeric
I have seen a problem that I still can not find any solution for it . It is under 5350 ONLY.
When we have two carrier and carrier number one could not terminate the call by any reason and Carrier number two terminate the call, after the call has been finished, I have two START/STOP signal from the router side with the same Prefix of Carrier number 1. I am sure that call is terminating on carrier number two, but the STOP signal shows that call terminated at carrier number ONE. It seems that information for START/STOP will repeated for carrier number two. Any one have any idea.
in below example, call can not terminate at dial-peer 111, and will go to dial-peer 222 and will terminate. but the STOP signal shows the destination number as 11101144...... instead of 22201144....
even the h323-remote-address=198.198.104.1
is correct , I mean it shows the second carrier ip address, but the destination number ( Called-Station-Id ) is not correct.
I have tested this thing, on 3 different 5350 and different IOS, 12.2 and 12.3 . Result is the same. But the same config undser 5300 working well !!!
any one can help me?
here is the relative config,
aaa authentication login h323 group radius
aaa authentication login telnet local
aaa authentication login voip group radius
aaa authorization exec h323 group radius
aaa authorization exec telnet if-authenticated
aaa accounting send stop-record authentication failure
aaa accounting exec default start-stop group radius
aaa accounting connection default start-stop group radius
aaa accounting connection h323 start-stop group radius
aaa accounting connection voip start-stop group radius
gw-accounting aaa
acct-template callhistory-detail
radius-server host 192.168.1.20 auth-port 1845 acct-port 1846
radius-server retransmit 1
radius-server key 5555
radius-server authorization permit missing Service-Type
radius-server vsa send accounting
radius-server vsa send authentication
translation-rule 111
Rule 0 ^01144 11144
dial-peer voice 111 voip
preference 1
destination-pattern 01144T
translate-outgoing called 111
session target ipv4:200.200.102.2
dtmf-relay h245-signal h245-alphanumeric
translation-rule 222
Rule 0 ^01144 22244
dial-peer voice 222 voip
preference 2
destination-pattern 01144T
translate-outgoing called 222
session target ipv4:198.198.104.1
dtmf-relay h245-signal h245-alphanumeric
