Help to upgrade IPS signatures

[MrOyvind]

Hi

After a upgrade from a older image to c181x-advipservicesk9-mz.124-24.T3.bin the old SDF files are not longer supported.

Need help to upgrade for the new .pkg files.

Current supported IPS versjon is v.5 :
Box#sh subsys name ips
Name Class Version
ips Protocol 3.001.002

My current signature files in flash :

IPS-sig-S479-req-E3.pkg
IPS-sig-S484-req-E4.pkg

Are these pkg files only supporting IPS v7.0 ?

When trying to copy these files: copy flash:IPS-sig-S479-req-E3.pkg idconf it occurs a loading error.
I think I need a new pkg file to upgrade to version 7.0 but what is the name of that file ?
This is a 1812w router.

Thank you

Oyvind

 

[burtsbees]

Can I assume you have a CCO account?

/

tim@tim-laptop ~ $ sudo apt-get install windows
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package windows...Thank Goodness!

 

[MrOyvind]

Yes, at work.

 

[burtsbees]

http://tools.cisco.com/support/down...&modifmdfid=null&imname=&hybrid=Y&imst=N&lr=Y

/



tim@tim-laptop ~ $ sudo apt-get install windows
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package windows...Thank Goodness!

 

[MrOyvind]

Hi

Thank you Burtsbees.

You`r link shows the files I listed in Flash: earlier in the post.
My partner in floor over sent me some upgrade files.
Must upgrade RAM . The first 1812 models was shipped with only 128 MB RAM.

Oyvind

 

[MrOyvind]

Still not working !

When copy flash:IPS-sig-S479-req-E3.pkg idconf or other pkg files the system fails to load\uncompress the files.

Upgraded router RAM to max 384MB and a new not orginal 128 MB CF card.
Pasted the cryptop key from Cisco`s website to the router.
What can be wrong ?

Thanks

Oyvind