Help setting up RRAS

[Talligen]

I installed an RRAS server to route between 192.168.91.0 and 192.168.254.0 but it's not working. The RRAS server is part of the ACME domain.

Nic 1 (internal LAN)- 192.168.91.53, 255.255.255.0, no GW
Nic 2 (external WAN)- 192.168.254.2, 255.255.255.0, 192.168.254.1

LAN Routing is installed.

All clients on the .91 network can communicate with the RRAS server. Clients can also ping the external NIC at 192.168.254.2. But beyond that, there's no communication.

On the external side, clients can ping 192.168.254.2.

So what's up? What can't clients on the 91 network get out?

 

[TechyMcSe2k]

Sounds as if you are missing static routes on your RRAS server.

http://support.microsoft.com/kb/178993

Reference for routing example:

http://5pfo6a.blu.livefilestore.com...pKDZ2pfU686bw/StaticRoutingExample.jpg?psid=1