Help setting up internet connection for 2 comps

[aaronsox]

OK, here's what I've done so far...
I have the hardware setup. My server has 2 nic's, one connected to my cable modem, the second to my lan. I believe I have RRAS and NAT setup correctly. I am unable to ping my server.


My question is what should the TCP/IP settings be for the 2nd nic in my server? (the one connected to my lan)

 

[cmptrnerd]

Ip Address 192.168.0.0 through 192.168.255.255 Class c
would work.

The remote access will allow to setup DHCP server in RRAS with this range and it should work.
192.168.0.1 as Private ip address.

Mark
mark@acsconsult.com

 

[aaronsox]

ok, then what should the gateway be for the 2nd nic? and what about the DNS server?

thanks

 

[cmptrnerd]

I don't think you need a gateway for the second Nic, since the server already knows how to get out to the internet or the gateway would be your Public Nic ip address.

DNS would be given by NAT DHCP, but if you configure in network card use the same DNS address as public Nic.

go to the following address and see if that will help

http://support.microsoft.com/servic...nat&rnk=1&src=DHCS_MSPSS_vap_SRCH&SPR=WIN2000

mark
mark@acsconsult.com