Hello, I have the following problem with Q-SIG between MD110 and Cisco (mod.3745):frequently happens to me that logon falls and I do not succeed to carry out calls (from MD to Cisco and viceversa), on telephone DBC212 appears:via economic occupied or the engagement tone is felt not ago but nothing! I wonder if it is a known problem of the Ericsson or if it happens alone on my system.
It follows Configuration MD 110 rel.10
<roddp:dest=87;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
87 99 1505100000000250000 0 3 0
END
<rodap:rou=99;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
99 SL60 H'00000300 H'15400000 H'06000010 NO
END
<rocap:rou=99;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
99 511000020000001 5 3110000001 0 30 128 00151513 111110000031 101100
END
Please Help me!!! thanks a lot!!!!
It follows Configuration MD 110 rel.10
<roddp:dest=87;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
87 99 1505100000000250000 0 3 0
END
<rodap:rou=99;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
99 SL60 H'00000300 H'15400000 H'06000010 NO
END
<rocap:rou=99;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
99 511000020000001 5 3110000001 0 30 128 00151513 111110000031 101100
END
Please Help me!!! thanks a lot!!!!