mtmurphy619
IS-IT--Management
I am in a pinch and need to program a digital extension on our Option 11 Meridian. I have prgrammed plenty of analog lines but never a digital. Can anyone help?? Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
HELP!?!? Programming a digital line! 2
- Thread starter mtmurphy619
- Start date
- Status
-
1
- #2
Hi,
Go into LD 20 (Or 11 if you are running very old software) type:
REQ: REQ
TYPE: Set Type
TN The digital TN
Run through the options and at key 0 type:
SCR dn
and enter through to REQ and your done...
That's a default digital set.
Marc D.
Marc D.
If Bill Gates had a nickel for every time Windows crashed... Oh wait, he does...
Go into LD 20 (Or 11 if you are running very old software) type:
REQ: REQ
TYPE: Set Type
TN The digital TN
Run through the options and at key 0 type:
SCR dn
and enter through to REQ and your done...
That's a default digital set.
Marc D.
Marc D.
If Bill Gates had a nickel for every time Windows crashed... Oh wait, he does...
-
1
- #3
Do you have any digital phones on your system that someone else has built? If so, you can print the digital set, then find a free tn and dn. Pretty much copy how the existing set is built, however you would enter different dn,secondary dn, tn, and name.
- Status
Similar threads
- Locked
- Question
