Help programming a 8510T ISDN terminal

[rerictruax]

I Have a customer with a P2P T1 going from a definity prologix to a remote site via Paradyne acculink extenders. They have BRI cards installed. They have 4 8510T terminals connected to the main system via this link. They also have analog stations and lines going across this T1. I moved the system to a new building and am having trouble getting the 8510T stations working. The analog and CO work fine. How do I reset the connection with the switch. Please help. I have been looking for an install manual for the 8510T but cannot find one on the avaya website. Someone please help.

http://www.rettelecom.com

One Geek Changing the World
One solution at a time

 

[orypecos]

use advanced google

http://support.avaya.com/japple/css...ea&temp.productID=107743&temp.bucketID=159898

maybe this will help?

 

[mikeydidit]

One thing that you may want to check. The 8510T terminals are wired a little different than the others. They use the white/blue white/green pairs at the jack ends.


Mike Jones
LSUHSC

 

[letman]

do you have nt-1 cards with power supply to the stations.