Hello
I just have a new power7 machine. I am not using virtualisation yet (hoepfully very soon) but I am creating new lpar standalone AIX 6.1
My issue is about SAS Disk never use it in the past.
so on Power5 when I create a new LPAR I allocate the SCSI but here on the Power7 I see the following:
RAID CONTROLLER - location Unixtx-P2-T3
PCI-E x8 Ext Dual-x4 3Gb SAS Adapter - location Unitx-P1C1
PCI-E x8 Ext Dual-x4 3Gb SAS Adapter - location Unitx-P2-C9-T1
PCI-E x8 Ext Dual-x4 3Gb SAS Adapter -location Unitx-P2-C9-T2
what are the differences and which one contains the internal disks (hdisk) ?
Thanks a lot in advance
Al.
I just have a new power7 machine. I am not using virtualisation yet (hoepfully very soon) but I am creating new lpar standalone AIX 6.1
My issue is about SAS Disk never use it in the past.
so on Power5 when I create a new LPAR I allocate the SCSI but here on the Power7 I see the following:
RAID CONTROLLER - location Unixtx-P2-T3
PCI-E x8 Ext Dual-x4 3Gb SAS Adapter - location Unitx-P1C1
PCI-E x8 Ext Dual-x4 3Gb SAS Adapter - location Unitx-P2-C9-T1
PCI-E x8 Ext Dual-x4 3Gb SAS Adapter -location Unitx-P2-C9-T2
what are the differences and which one contains the internal disks (hdisk) ?
Thanks a lot in advance
Al.