my program use flash for its menu, however, when i install it on another computer, the menu won't show... what could have been the reason for it? the ocx use for the flash has been included in the installation which is the plugin.ocx... is there any thing else which should be included... please help... tnx..
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
help on flash
- Thread starter JeffSabat
- Start date
SemperFiDownUnda
Instructor
have you checked out the controls web site?
when you created the setup did you get errors on dependancy information?
when you created the setup did you get errors on dependancy information?
Remember that flash needs the shockwave plugin that either has to be downloaded from Macromedia or gets installed with flash itself.
A PC without this shockwave plugin will not be able to display any flash(shockwave) element
**********************************
May the Code Be With You...
----------
x50-8 (X Fifty Eigt)
A PC without this shockwave plugin will not be able to display any flash(shockwave) element
**********************************
May the Code Be With You...
----------
x50-8 (X Fifty Eigt)
- Status
