help on Call Pick up network wide and ring again over dpnss

[debussy67]

Hi guys,
can asnyone help?
I have a tiel line between an ericsson and a CS1000 using DPNSS.

I cannot get ring again and call pick up network wide working.

They work nortel<>nortel and Ericson<>Ericsson.

But I want that it works also between nortel<>Ericsson and vice verse.

 

[Firebird Scrambler]

You might need to go into "pdt" and anable the plugin 5 patch by entering in ple 5. i.e.

5 MPLR06084 PI: NRGA is not working with tandem node & digit manipulation


To List/Enable/Disable these PLUGINs use the following commands

First login to pdt. NB All commands are in lowercase

1. To list status of all PLUGINs plp (PLP)
2. To list status of individual PLUGINs plp # (PLP #) where # is the PLUGIN number
3. To enable PLUGIN ple # (PLE #) where # is the PLUGIN number
4. To disable PLUGIN pld # (PLD #) where # is the PLUGIN number




I've also found out this issue below.

MPLR18879 Issue: 2 - X21 03.00 SSC/CPT/CPP Public= YES Status= Released
Title: DPNSS: RGA (Ring Again) doesn't work across the MCDN (ITG) to DPNSS Gateway, if LSC's are being used.



All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[SL1M1]

You may want to note certain levels of DPNSS functions are limited between different vendors PBX's depending on releases

Cheers!!