Guest_imported
New member
- Jan 1, 1970
- 0
i NEED TO KNOW HOW TO WRITE A PROGRAM THAT PRINTS OUT MAILLING LISTS WITH AN INTERACTIVE SCREEN IPUTING NAME ADDRESS ZIP ETC.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
HELP NEEDED
- Thread starter Guest_imported
- Start date
- Status
Lots of work I am afraid. Very much work.
What compiler do you use?
If you write with a classic interface, I have a generator which creates a source based on a screen layout. You get a kind of database-program in which you can scroll up and down, one-to-one with the screen. You can modify the source after that.
My compiler is CA-REALIA. If you create a layout 80 characters width, 25 lines long (the pc format, not the mainframe format), and you place it here, I'll generate a sample program, only, the source uses some screen handling routines in my environment and that means that there will be a part you have to write yourself, probably using a screen section or so.
In the layout you use the # symbol to create a numeric field and a @ to create a alphanumeric field. The amount of #####... 's will also be the length of the field.
I'll put the generated source here on the board.
I'll hear from you I guess?
What compiler do you use?
If you write with a classic interface, I have a generator which creates a source based on a screen layout. You get a kind of database-program in which you can scroll up and down, one-to-one with the screen. You can modify the source after that.
My compiler is CA-REALIA. If you create a layout 80 characters width, 25 lines long (the pc format, not the mainframe format), and you place it here, I'll generate a sample program, only, the source uses some screen handling routines in my environment and that means that there will be a part you have to write yourself, probably using a screen section or so.
In the layout you use the # symbol to create a numeric field and a @ to create a alphanumeric field. The amount of #####... 's will also be the length of the field.
I'll put the generated source here on the board.
I'll hear from you I guess?
- Status
Similar threads
- Locked
- Question