JamiePocock
Technical User
===========================================================
I am new to Cisco so hopefully someone can see what I have done, I have spent days and days before seeking help, so someone please help.
have a 2651XM which I upgraded the IOS on now it won't load, I think the image was to large so I TFTP the old image back now it keeps saying %Software-forced reload
Heres the output on boot
===========================================================
System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)
Copyright (c) 2002 by cisco Systems, Inc.
C2600 platform with 65536 Kbytes of main memory
rogram load complete, entry point: 0x80008000, size: 0x44d5d8
Self decompressing the image : #################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
######################################################### [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.1(17), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 03-Sep-02 22:16 by kellythw
Image text-base: 0x80008088, data-base: 0x8082D1B0
cisco 2651XM (MPC860) processor (revision 0x100) with 53248K/12288K bytes of mem
ory.
Processor board ID JAD071605PV (1236377468)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
4 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]:
===========================================================
Now heres the show version
===========================================================
Router>show version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.1(17), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 03-Sep-02 22:16 by kellythw
Image text-base: 0x80008088, data-base: 0x8082D1B0
ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)
Router uptime is 0 minutes
System returned to ROM by power-on
System image file is "flash:C2600-i-mz.121-17.bin"
cisco 2651XM (MPC860) processor (revision 0x100) with 53248K/12288K bytes of mem
ory.
Processor board ID JAD071605PV (1236377468)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
4 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2142
===========================================================
I set the confreg to 0x2142 to make the router load, if I cange it back to config-register 0x2102 it then does this
===========================================================
System configuration has been modified. Save? [yes/no]: n
Proceed with reload? [confirm]
00:04:04: %SYS-5-RELOAD: Reload requested
System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)
Copyright (c) 2002 by cisco Systems, Inc.
C2600 platform with 65536 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x44d5d8
Self decompressing the image : #################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
######################################################### [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.1(17), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Tue 03-Sep-02 22:16 by kellythw
Image text-base: 0x80008088, data-base: 0x8082D1B0
%Software-forced reload
============================================================
The Version 12.1(17) is the one I want to use as it was the original that worked. the one I put on was Version 12.2(7r)
Now what do I have to do to replace the 12.2 in System Bootstrap with 12.1
Please help I am pulling my hair out here
