Help needed with Legend Voice Mail

[wswhite]

I replaced a couple of cards in my Legend system and in the process I killed the voice mail. I had to do a board renumber and when I did that the same extensions were assigned to the mail card as before. The labels were lost but the extensions remained the same. Dialing 770 now yields ringing without answer. I've also managed to kill the Auto Attendants too. How do re-associate the 770 with voice mail. I moved the VM from slot 11 to slot 10. I installed a GS/LS MLX in slot 11. Any help would be appreciated. I can't move the GS/LS MLX to any other slot because I lose my D100 programming. Thanks in advance.

 

[TouchToneTommy]

Merlin Messaging Initial Programming
Create Calling Group, Assign Group Members, Enable Rotary Signalling
F1 - SysProgram
F5 - Start
F6 - Extensions
PgUp - More
F4 - Grp Calling
F9 - Members
770 - Enter extension number of group
F10 - Enter
Enter group members in Ascending Order (use Ext. No., Log. ID, or Slot/Port)
F10 - Enter - Repeat for all ports
PgDn - Inspect - Verify all ports are listed in order
F5 - Back
F1 - Hunt Type
770 - Enter extension number of group
F10 - Enter
F2 - Linear
F10 - Enter
PgUp - More
F1 - Group Type
770 - Enter extension number of group
F10 - Enter
F3 - Integ VMI
F10 - Enter
F5 - Back
F5 - Back
PgUp - More
F7 - RotaryEnabl
Enter Rotary Extension (Voice Mail Ports, use Ext. No., Log ID, or Slot/Port)
F10 - Enter - Repeat for all ports
PgDn - Inspect - Verify all ports are listed
F5 - Back
F5 - Back