admiralzino
IS-IT--Management
guys,
i need help.
we have a network of 3 md's connected serially, i.e A is connected to B, and B is conected to C. PSTN is connected to C, and TETRA system is connected to B. recently the tie-line between A & B was changed from DPNSS to QSIG. since then, international calls cannot be made from A, and can be made from B and C. secondly, when calls to TETRA radios are made from A it displays UNKNOWN, if made from B, it displays the number.
i believe there's something wrong with the new QSIG link, but i can't point it out. see below for printouts:
<RODDP
EST=9009;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
9009 23 1605110000000250006000000 0 1 0
END
<ROCAP:ROU=23;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
23 0110000000000010 5 3110000107 0 30 128 00151515 111110000031 111111
END
<RODAP:ROU=23;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
23 SL60 H'00000350 H'15440000 H'06000000 NO
END
THANKS.
i need help.
we have a network of 3 md's connected serially, i.e A is connected to B, and B is conected to C. PSTN is connected to C, and TETRA system is connected to B. recently the tie-line between A & B was changed from DPNSS to QSIG. since then, international calls cannot be made from A, and can be made from B and C. secondly, when calls to TETRA radios are made from A it displays UNKNOWN, if made from B, it displays the number.
i believe there's something wrong with the new QSIG link, but i can't point it out. see below for printouts:
<RODDP
EST=9009;EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
9009 23 1605110000000250006000000 0 1 0
END
<ROCAP:ROU=23;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
23 0110000000000010 5 3110000107 0 30 128 00151515 111110000031 111111
END
<RODAP:ROU=23;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
23 SL60 H'00000350 H'15440000 H'06000000 NO
END
THANKS.