help me change disk

[sunrise72]

hello i have system with 30 lim i nedd make a disk change
someone can help my how do or send me a procedure:

<FISCP:IODEV=Sysdisk1;
FILE SYSTEM CAPACITY DATA
TOTAL DISK SPACE: 2067 MBYTES
SUBFS: SYSSUBFS11
KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
64512 5025 16000 /SYSN/USR1
SUBFS: SYSSUBFS12
KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
65536 26819 16000 /SYSN/USR1/SES/DR/REL1/S2
END

<FISCP:IODEV=Sysdisk2;
FILE SYSTEM CAPACITY DATA
TOTAL DISK SPACE: 2067 MBYTES
SUBFS: SYSSUBFS21
KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
64512 23122 16000 /SYSN/USR2
SUBFS: SYSSUBFS22
KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
64512 25827 16000 /SYSN/USR2/SES/DR/REL2/S2
END


Thank you ALDOS

 

[unknown1]

Why do you want to change your Hard Disk ? Backup , probleme with HDU ?

 

[rfpui]

printout of command
IODDP

----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[sunrise72]

i change a disk to have a safe copy and every months change again:
<IODDP;
I/O DEVICE DATA
NODE IODEV/SUBFS BPOS/EQU I/O-BUS TYPE/USAGE STATUS AUTH
SYSN - 001-0-60 - - IN SERVICE
SYSN SYSDISK1 001-0-60-0 SCSI/3 ADTX IN SERVICE
SYSSUBFS11
SYSSUBFS12
SYSN SYSDISK2 001-0-60-0 SCSI/4 ADTX IN SERVICE
SYSSUBFS21
SYSSUBFS22
SYSN SYSTERMINAL 001-0-60-1 - MML - 7
SYSN SYSTERMINAL1 001-0-60-2 - MML - 7
SYSN SYSTERMINAL2 001-0-60-3 - MML - 7

 

[slash50]

BLEQI:EQU=1-0-60-0;
FIMOE:SUBFS=SYSSUBFS22;
FIMOE:SUBFS=SYSSUBFS21;
FIMOE:SUBFS-SYSSUBFS12;
FIMOE:SUBFS=SYSSUBFS11;
IOSIE:NODE=SYSN,IODEV=SYSDISK2;
IOSIE:NODE=SYSN,IODEV=SYSDISK1;

<--PHYSICALLY SWAP DISKS

IOSII:NODE=SYSN,IODEV=SYSDISK1,SIPOS=3,SUBFS=SYSSUBFS11&SYSSUBFS12;
IOSII:NODE=SYSN,IODEV=SYSDISK2,SIPOS=4,SUBFS=SYSSUBFS21&SYSSUBFS22;

FICRI:SUBFS=SYSSUBFS11,SIZE=64;
FICRI:SUBFS=SYSSUBFS12,SIZE=64;
FICRI:SUBFS=SYSSUBFS21,SIZE=64;
FICRI:SUBFS=SYSSUBFS22,SIZE=64;

FIMOI:SUBFS=SYSSUBFS11,PATH=/SYSN/USR1;
FIMOI:SUBFS=SYSSUBFS12,PATH=/SYSN/USR1/SES/DR/REL1/S2;
FIMOI:SUBFS=SYSSUBFS21,PATH=/SYSN/USR2;
FIMOI:SUBFS=SYSSUBFS22,PATH=/SYSN/USR2/SES/DR/REL2/S2;

BLEQE:EQU=1-0-60-0,ALLFM=YES;

And from there you should be ready to go. I haven't got a test system in front of me at the moment so someone please verify those instructions and correct me if I am wrong please )

 

[mundus]

Hi, just to be sure:
BLEQI:EQU=1-0-60-0;

IOSII:NODE=SYSN,IODEV=SYSDISK1,SIPOS=3,SUBFS=SYSSUBFS11&SYSSUBFS12;
IOSII:NODE=SYSN,IODEV=SYSDISK2,SIPOS=4,SUBFS=SYSSUBFS21&SYSSUBFS22;

FICRI:SUBFS=SYSSUBFS11,SIZE=64;
Y;
FICRI:SUBFS=SYSSUBFS12,SIZE=64;
Y;
FICRI:SUBFS=SYSSUBFS21,SIZE=64;
Y;
FICRI:SUBFS=SYSSUBFS22,SIZE=64;
Y;
FICRI:SUBFS=TM-SUBFS,SIZE=64;
Y;

FIMOI:SUBFS=SYSSUBFS11;
FIMOI:SUBFS=SYSSUBFS21;

BLEQE:EQU=1-0-60-00,ALLFM=YES;

FIDIIATH=/SYSN/USR1/SES/DR/REL1;
FIFOCATH=/SYSN/USR1/SES/DR/REL1,OWNER=DR;
FIDIIATH=/SYSN/USR1/SES/DR/REL1/P;
FIFOCATH=/SYSN/USR1/SES/DR/REL1/P,OWNER=DR;
FIDIIATH=/SYSN/USR1/SES/DR/REL1/S1;
FIFOCATH=/SYSN/USR1/SES/DR/REL1/S1,OWNER=DR;
FIDIIATH=/SYSN/USR1/SES/DR/REL1/S2;
FIFOCATH=/SYSN/USR1/SES/DR/REL1/S2,OWNER=DR;
FIDIIATH=/SYSN/USR2/SES/DR/REL2;
FIFOCATH=/SYSN/USR2/SES/DR/REL2,OWNER=DR;
FIDIIATH=/SYSN/USR2/SES/DR/REL2/P;
FIFOCATH=/SYSN/USR2/SES/DR/REL2/P,OWNER=DR;
FIDIIATH=/SYSN/USR2/SES/DR/REL2/S1;
FIFOCATH=/SYSN/USR2/SES/DR/REL2/S1,OWNER=DR;
FIDIIATH=/SYSN/USR2/SES/DR/REL2/S2;
FIFOCATH=/SYSN/USR2/SES/DR/REL2/S2,OWNER=DR;

BLEQI:EQU=1-0-60-00;

FIMOI:SUBFS=SYSSUBFS12,PATH=/SYSN/USR1/SES/DR/REL1/S2;
FIMOI:SUBFS=SYSSUBFS22,PATH=/SYSN/USR2/SES/DR/REL2/S2;

BLEQE:EQU=1-0-60-00,ALLFM=YES;