help me: analog trunk problem after bc12

[cuneyt2919]

Hi all,
We have an analogue trunks (tlp11) between FCT (GSM terminal) and our md110 BC12 system..Analogue trunks answering position is DISA..(6037) And disa has permission for making internal calls
[tt]
VERSION=CXP1010101/2/BC12SP5/R2A

<RODAP:ROU=52;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
52 TL11 H'00000012 H'0000010A H'000020D5 NO

END

<rocap:rou=52;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
52 1110000000000010 4 2000000000 0 30 128 02151515 200001001000 001100

END


<RODNP:ROU=52;
ROUTE DAY AND NIGHT NUMBER DATA
ROU TRU DAY NIG
52 6037 6037

END
[/tt]

Problem is, two weeks ago when the system was BC9 when the call comes from this analog trunk , a guy was able to dial internal number by the help of DISA, There was no problem, But when i call this analogue trunk, md110 gives the dial tone and after dialing an internal number,it seems to ring once(but it doesn't give ringing tone in fact) then it cuts off the line..

Other point is when i call DISA from outside, there is no problem.This shows that, DISA has no problem but analogu trunk has problem..

Does anybody have idea about route parameters how it works?

Help me please...
Rgrds.

 

[cuneyt2919]

Hi i fixed it with the parameters below

ROCAI:ROU=X,SEL=712000000000,TRM=4,SERV=2100030000,TRAF=00151514,SIG=400001000000;
RODAI:ROU=X,TYPE=TL11,VARC=00000022,VARO=00000815,VARI=00000680;
by the help of DISA thread in this forum...

I love this forum
Greetings