Help!! I have never worked with

[JMCColorado]

Help!!

I have never worked with a router, or a pix firewall, but I have found myself in a situation where I need to get somebody a vpn connection into my network and this is what I have to go through. There are currently no machines in the DMZ. I need to get a connection to a server that is in the LAN. How is this possible? Its a mission critical issue - Of course!


Internet
|
|
Public IP (xxx.xxx.xxx.xxx)
---------------------------
Cisco 2600 Router
(Performing NAT)
---------------------------
10.0.0.1
|
(DMZ)
|
10.0.0.2
---------------------------
Cisco PIX 515E
---------------------------
10.0.1.1 255.255.255.0
|
|
|
|
Active Directory DHCP LAN

Thank you so much for any help you can give me!

 

[Guest_imported]

according to your situation ,I think you may use Vpdn for somebody accessing your server,if useing vpdn you need the isp support vpdn.
vpdn connection need dialup to an isp's NAS and then build a vpn tunnel between your PIX and isp's NAS .
please tell me your datailed requirement,may be I can give some advice.

 

[Guest_imported]

according to your situation ,I think you may use Vpdn for somebody accessing your server,if useing vpdn you need the isp support vpdn.
vpdn connection need dialup to an isp's NAS and then build a vpn tunnel between your PIX and isp's NAS .
please tell me your datailed requirement,may be I can give some advice.

 

[Guest_imported]

according to your situation ,I think you may use Vpdn for somebody accessing your server,if useing vpdn you need the isp support vpdn.
vpdn connection need dialup to an isp's NAS and then build a vpn tunnel between your PIX and isp's NAS .
please tell me your datailed requirement,may be I can give some advice.