Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
HELP-I have designed a one page report but 2 pages print
- Thread starter nomi1
- Start date
TonyMcGuire
Programmer
The most common reasons I've found for this are:
1. Not leaving enough space to the right, and the field is too wide. It doesn't print an extra line (Fit Height OFF), but forces an extra page.
2. Field height set too small (vertical) for font used. Doesn't print extra line but ejects extra page.
3. 'Word Wrap' and 'Fit Height' settings must match.
4. Likely more, but those come to mind.
Check and let us know if any of the above help.
Tony McGuire
"It's not about having enough time; we have the rest of our lives. It's about priorities.
1. Not leaving enough space to the right, and the field is too wide. It doesn't print an extra line (Fit Height OFF), but forces an extra page.
2. Field height set too small (vertical) for font used. Doesn't print extra line but ejects extra page.
3. 'Word Wrap' and 'Fit Height' settings must match.
4. Likely more, but those come to mind.
Check and let us know if any of the above help.
Tony McGuire
"It's not about having enough time; we have the rest of our lives. It's about priorities.
- Status
Similar threads
- Locked
- Helpful tip