Help for a newbie. Vlans across switches

[bigdaddymalcolm]

n my test environment, I have 2 3808.
3808 #1 VLAN default 10.5.0.1/16
port 1:16 tagged
port 1:1 untagged-> Windows PC(1) connected ip 10.5.0.15

conf ipr add 10.6.0.0/16 10.5.0.2
ena ipf

3808 #2 Vlan default 10.5.0.2/16
port 1:16 tagged

3808 #2 Vlan test 10.6.0.1/16
port 1:1 untagged Windows pc(2) ip 10.6.0.15 config ipr add 10.5.0.0/16 10.5.0.2 ena ipf

Now I can ping 3808 #1 from #2 and vice versa I can telnet into 3808 # 1 from PC(2) and vice versa But I can not ping PC 1 from PC 2 Any help?
Thanks

 

[NARBE]

Hello,

You must use too:
enable ipforwarding vlan <vlan-name> for each vlan

do a sho ipconfig (or show vlan) to see the ipstatus on your vlans

Regards

 

[ExtremeTek]

Agree with NARBE, check IP forwarding

Also, what are the default gateway IP addresses for the two PC's.

 

[bigdaddymalcolm]

Thanks everybody. The problem is solved, and turned out to be a bad SMMi board. Replaced it, and no more problems...