Help enabling KX-TA62491 fax card

[gsnake2000]

Hi,

I just installed the card and now trying to understand how I can enable it.
Can someone help please?
I guess I need to setup the DISA extensions or something similar...

thanks in advance,

gsnake2000

 

[cwc3]

start at page 4-82 in install manual...

 

[gsnake2000]

yes, I went there and selected "with AA" option.. then I went to the next page and selected jack 1 for DISA.. then tried to call from outside line but nothing special happened - all the phones were ringing as usual..
I guess I am missing something here..

thanks
gsnake2000

 

[cwc3]

you need to record a disa ogm 1... define the fax ext
and then set up your disa ringing assignment 414-16 then do a test call on that line page 3-46 has a nice list and there are at least 20 pgm fields that pertain to disa implementation...

 

[gsnake2000]

found it - thanks! but nowhere it says how to record the OGM.. now when I call from outside line the station picks up in 3 seconds then beeps then after few seconds disconnects. So, I am on my way of setting it up..
Btw, I guess the first thing I need now is to set a password otherwise my line could be hacked, right?

thanks again.

gsnake2000

 

[cwc3]

nowhere?thats funny took me all of 5 seconds to find this on this on page page 3-137 of users guide...


at jack 01 or mgr ext
switch to program or press program button
(Depends on Phone model)
dial 9
Lift the handset. Dial 0 for both OGM 1 and OGM 2.
Dial 1 for OGM 1.
Dial 2 for OGM 2.
Record a message
(up to 30 seconds).
Press AUTO DIAL/STORE.
AUTO DIAL
STORE
Confirmation
tone
Confirmation
tone
0 or 1 or 2
<PT Display Example>
Time counter
(seconds)
• The STORE indicator light turns off. Recording
starts after the confirmation tone.
Record 1&2:00
• The STORE indicator light turns steady red.
• If you exceed the time (30 seconds), recording is stopped automatically

yes change code and then post the phone number and code here!!

 

[gsnake2000]

i don't have this page in both user guide and installation guide.. thanks for digging that for me..

 

[cwc3]

let me know how much you charged the customer for not reading so i can bill you,,,,,,

 

[gsnake2000]

I guess I did not have the proper documentation.. I am the customer myself so this was free of charge..
but if you are in Toronto the beer is on me!