Hi all. Could someone please advise me as to the load I get into and the commands used to determine which PRI is my clock on an option 81 release 4.5? We want to diminish the number of PRI spans we have by one and want to ensure we don't take down the PRI that we use for clocking. Thanks for your help!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Help determining clock source 1
- Thread starter lpjbell
- Start date
-
1
- #2
A couple of ways:
1) LD 73
REQ: PRT
TYPE: DDB
(look for the PREF and SREF prompts. Those will be your Primary and Secondary clocks)
2) LD 60
.SSCK 0 (stats clock 0)
.SSCK 1 (stats clock 1)
These commands will tell you your clock sources as well.
War Eagle!
Lions Baseball '09!
1) LD 73
REQ: PRT
TYPE: DDB
(look for the PREF and SREF prompts. Those will be your Primary and Secondary clocks)
2) LD 60
.SSCK 0 (stats clock 0)
.SSCK 1 (stats clock 1)
These commands will tell you your clock sources as well.
War Eagle!
Lions Baseball '09!
- Status
Similar threads
- Locked
- Question