Help - Configuring HP2650 from Default

[StilPhone]

Hi,

Apologies - I know very little in switches as I'm mainly into Mitel Systems, but I need to setup a ProCurve 2650 from default - Can anyone please point me to a guide or give me a pointer as to where to start?
How should I connect to the switch? Can I use ethernet as I don't think we have a console cable....

Thanks in advance guys!

Phil

 

[unclerico]

HP's site has config guides and command documenation so I would start there. It's tough to get you to a config when we don't know your goal. As for connecting to the switch, you can search google on how to create your own console cable or you can pick one off e-bay for about $1. I do know that there is a web interface, but I've never used it.

I hate all Uppercase... I don't want my groups to seem angry at me all the time! =)
- ColdFlame (vbscript forum)

 

[StilPhone]

Thanks, got most of it setup now, however we can't get the switch to work with our Mitel system...

Basically we have 1 subnet, DHCP data server and Mitel 3300 on another subnet, 10 for data and 77 for Voice, the Vlan's are 10 for data and 77 for Voice.

If I manually program a phone to use VLAN 77 then everything works fine however if we don't specify the phones don't find the 77 VLAN, but another VLAN - 13032994xxxx can't remember exactly the rest...

Does anyone know how we can fix this?

Thanks again!

Phil

 

[intrigrant]

Mitel phones use LLDP right out of the box so enable LLDP on the switch and the phones should work.
I don't know on the HP but on a Extreme thats all i had to do for the phones to start( apart from setting up VLANs and QoS etc )