HELP CISCO SWITCH 3500 XL HARDWARE ERROR

[patelbg2003]

Hi I need some serious assistance. I bought this switch of ebay to help me prepare for my CCNA exam. It was working fine for a few days then suddenly It went dead. The dump below shows that the ports are not responding to the loop back test and switch is just hanging. Is their anyway I can fix this ?????

Best Regards

B


Preparing to dump core...
Buffered messages:

00:00:18: %SYS-5-CONFIG: Configured from NVRAM by console
00:00:18: %SYS-5-RESTART: System resta
Cisco Internetwork Operating System Software
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC3b, RELEASE SOFTWA
RE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 15-Feb-02 10:51 by antonino
00:00:18: Frame Invalid Detected on Del Mar 0 port mask = 0xE8
Queued messages:
00:00:20: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging out
put.

00:00:18: %SYS-5-CONFIG: Configured from NVRAM by console
00:00:18: %SYS-5-RESTART: System restarted --
Cisco Internetwork Opera
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC3b, RELEASE SOFTWA
RE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 15-Feb-02 10:51 by antonino
00:00:18: Frame Invalid Detected on Del Mar 0 port mask = 0xE8
00:00:19: %LINK-4-ERROR: FastEthernet0/4 is experiencing errors
Exception (8192)! Debug Exception (Could be NULL pointer dereference)
CPU Register Context:
Vector = 0x00002000 PC = 0x001DF540 MSR = 0x00029200 CR = 0x22000020
LR = 0x001DF534 CTR = 0x0015BC18 XER = 0x00000
R0 = 0x001DF534 R1 = 0x0051E078 R2 = 0x00000000 R3 = 0x00000000
R4 = 0x0051DE38 R5 = 0x000003E8 R6 = 0x0051DCD8 R7 = 0x00000000
R8 = 0x00450000 R9 = 0x00430000 R10 = 0x00000006 R11 = 0x00029200
R12 = 0x0000522D R13 = 0x00000000 R14 = 0x00000000 R15 = 0x00000000
R16 = 0x00000000 R17 = 0x00000000 R18 = 0x00000000 R19 = 0x00000000
R20 = 0x00000000 R21 = 0x00000000 R22 = 0x00000000 R23 = 0x00000000
R24 = 0x00000000 R25 = 0x00000000 R26 = 0x00000000 R27 = 0x00000000
R28 = 0x00000000 R29 = 0x00430000 R30 = 0x00000000 R31 = 0x00000000

Stack trace:
PC = 0x001DF540, SP = 0x0051E078
Frame 00: SP = 0x0051E088 PC = 0x001DF534
Frame 01: SP = 0x0051E0A8 PC = 0x001024A0
Frame 02: SP = 0x0051E0C8 PC = 0x000E6604
Frame 03: SP = 0x00000000 PC = 0x001E6830

Cisco Internetwork Operating System Software
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC3b, RELEASE SOFTWA
RE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 15-Feb-02 10:51 by antoni

falmouthsw1 uptime is 22 seconds

cisco WS-C3512-XL (PowerPC403) processor (revision 0x01) with 8192K/1024K bytes
of memory.


C3500XL Boot Loader (C3500-HBOOT-M) Version 12.0(5)WC2a, RELEASE SOFTWARE (fc1)
Compiled Tue 18-Dec-01 13:10 by devgoyal
starting...
Base ethernet MAC Address: 00:09:7c:e7:6a:c0
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 16 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 3612672
flashfs[0]: Bytes used: 3251712
flashfs[0]: Bytes available: 360960WC3b.bin" uncompressed and installe
flashfs[0]: flashfs fsck took 4 seconds.
...done Initializing Flash.
executing...
Boot Sector Filesystem (bs installed, fsid: 3

Use, duplica
Parameter Block Filesystem (pb installed, fsid: 4
subject to
Loading "flash:c3500XL-c3h2s-mz.120-5.WC3b.bin"...##############################
(c) of the Commercial Computer Software - Restricted
################################################################################bparagraph
(c) (1) (ii) of t
##########################################################
Software clause at

File "flash:c3500XL-c3h2s-mz.120-5.WC3b.bin" uncompressed and installed, entry psco Systems, Inc.
170 West Tasman
oint: 0x3
Use, duplication, or disclosure by the Government is
IOS (tm) C3500XL Software (C350
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restrictedc) 1986-2002 by cisco Systems, Inc.
Rights clause at FAR sec. 52.227-19 and subparagraph10:51 by antonino
(c) (1) (ii) of the Rights in Technical Data and Computer


Initia
Software clause at DFARS sec. 252.227-7013.
flashfs[1]: 16 files, 2 directorie

cisco Systems, Inc.
flashfs[1]: 0 orphaned fi
170 West Tasman Drive
San Jose, California 95134-17062672
flash


flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 3612672
flashfs[1]: Bytes used: 3251712
flashfs[1]: Bytes available: 360960
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete.
...done Initializing C3500XL flash.
C3500XL POST: System Board Test: Passed
C3500XL POST: Daughter Card Test: Passed
C3500XL POST: CPU Buffer Test: Passed
C3500XL POST: CPU Notify RAM Test: Passed
C3500XL POST: CPU Interface Test: Passed
C3500XL POST: Testing Switch Core: Passed
C3500XL POST: Testing Buffer Table: Passed
C3500XL POST: Data Buffer Test: Passed
C3500XL POST: Configuring Switch Parameters: Passed
C3500XL POST: Ethernet Controller Test: Passed
C3500XL POST FAILURE: front-end post: FastEthernet0/1:
C3500XL POST FAILURE: looped-back packet not received
C3500XL POST FAILURE: front-end post: FastEthernet0/4:
C3500XL POST FAILURE: looped-back packet not received
C3500XL POST FAILURE: front-end post: FastEthernet0/8:
C3500XL POST FAILURE: looped-back packet not received
C3500XL POST: MII Test: Passed

 

[vipergg]

You may sol , this looks like a hardware failure and seeing that it was bought off of ebay you are probably on your own . No way to fix a hardware problem if it's failing POST .