dave9475
Technical User
- Mar 18, 2008
- 1
how can i read the drive if drive was working on other computer?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
help cannot read hard drive
- Thread starter dave9475
- Start date
- Status
In order to be able to do what Lemon13 is suggesting you have to turn off simple file sharing.
Click the View tab, and then select the Use Simple File Sharing (Recommended) check box to turn on Simple File Sharing. (Clear this check box to turn off this feature.)
But is this your problem?
[navy]When I married "Miss Right" I didn't realise her first name was 'always'. LOL[/navy]
Click the View tab, and then select the Use Simple File Sharing (Recommended) check box to turn on Simple File Sharing. (Clear this check box to turn off this feature.)
But is this your problem?
[navy]When I married "Miss Right" I didn't realise her first name was 'always'. LOL[/navy]
acewarlock
Technical User
Are you putting a drive from another PC into your PC? Set the pins to slave and you should be able to see it.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
- Status
Similar threads