help bcm 50

[drtelephone]

oki have a bcm 50 the the motherboard is bad. its rls3.0 if i get another 3.0 and swap out the hard drive will that move over the key codes.

 

[Firebird Scrambler]

You must have the keycode file. It can be found within a backup file. Go to the FAQ section for more information. A new hard drive at the same release can be swapped out.

It's bext to log in and put in the keycode file again, before patching it and then reloading back in the backup file, assuming that you have one?.

This guide I did might be of some help to you?.

http://www.ghtrout.com/files/Replacing_a_Hard_Disk_on_a_BCM_50_System.zip

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[drtelephone]

what if i dont have a backup. thats why i want to swap out the hard drive. my question is by doing that will the key code be on the old drive and will it work with a new system.

 

[exsmogger]

The system ID resides on the main board, so the license file in your current hard drive would not work in the replacement BCM-50.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952