Hello; I want to be able to print

[EdGreen]

Hello;
I want to be able to print a graphic of a signature on every page. The new software I used for forms does not allow this. (My old one did).

WaterMark does not allow graphic, just text.

So, I want to be able to send a PCL command (or use a program) to say "Start putting this graphic on every page at X,Y coordinate", then print using this new program, and then stop it.

I don't have a clue how to use PCL can can't find a program that would do this. Any ideas?

I use a Hewlett Packard 5SI nx

Ed Green

 

[jlasman]

At the PCL level, you want an automatic overlay.

The signature is scanned and converted to PCL format and
setup as a macro. Once the macro file has been downloaded
to the printer, then a simple PCL command will enable the
macro for overlay, and the signature will be printed on
every page page until it is explicitly disabled or the
printer is reset.


Jim Asman
jlasman@telus.net

 

[drdebit]

thread929-477446 has comments about how one user gets signatures on checks.