Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hello, I have configured media man

Status
Not open for further replies.

MineAlone

Systems Engineer
Mar 11, 2021
7
ZW
Hello,
I have configured media manager to archive call recordings through NAS connector.
But I still see reachable as No in the active NAS connector.
I read through the documentation to confirm what I did was right but still cannot
find the reason why it shows Reachable as No.
Please anybody has an idea on what am experiencing and what can be done to make the archive work.
Attached is a snapshot of the active connector settings.
 
It may just be a bug in MM. Mine says No in reachable, and it works just fine.

-Austin
I used to be an ACE. Now I'm just an Arse.
qrcode.png
 
I suppose you should know if it works though. When you create the connector and do a test, does it say it was successful? If not...I mean maybe it's just not reachable?

The path should be

192.168.1.2/Archive

Nothing else, no extra slashes.
Change 192.168.1.2 to your NAS ip, and Archive is the name of the share.
Make sure the user you have setup has read/write permissions on that share.

-Austin
I used to be an ACE. Now I'm just an Arse.
qrcode.png
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top