Hello I have a customer with 2 MICS

[WhiteStarMI]

Hello I have a customer with 2 MICS both currently have T! cards in them and setup for E&M lines. He does not want local CO involved.

What he would like to do is connect them to be able to transfer calls. His buildings are close together and he has a 12 strand fiber running between them but no copper.

can anyone think of a way to make this happen using the fiber and what equipment would it take?

Thank you

 

[Rapetou]

can you replace with only one system MICS

What's your configuration (how many sets and lines used)

You can replace with only one system and instal your extension module on fiber...

or find T1 on fiber converter module.

Good luck !!

 

[WhiteStarMI]

Each Building has over 80 phones the systme is almost identical on poth sides MICS 0X32 (3) 0X16 (1) 12X0
one side does have a 4th 0X16

 

[jkupski]

You want two of these:

http://www.transition.com/products/mcon_platform/standalone/t1/ssdtfx0xx.htm

There's another thread (thread799-614588) about networking the 2 MICS back to back once your have the physical connection. Look for executone's post.

 

[WhiteStarMI]

Yes that's it!
It was the media converters that I was really unsure of but your link looks like the ticket and the past thread will help when I start the install thanks for the help