Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hello. After installed and update

Status
Not open for further replies.

R2M3A

Technical User
Mar 14, 2023
10
BJ
Hello.
After installed and update thé full sofware in my ns500,the HDV100 phones finally registered. Now i need to install theme on remote site. In the phones setting i change the Rport,sip and rtp ports Times and put the global router IP as registrar and proxy servers adress and change the there to 36061.i change transport protocol to TLS and TLS mode to sip/TLS.
In the pbx i change UDP and TLS sip extension servers to 15060 to and 15061 and NAT-SIP proxy and TLS servers to 36060 and 36061. The SIP phones are set romte+localy. I would want to know if i must imported the pbx Root_CERT. cfg to the HDV100 phones before they work at remote???
If it's that, who could do that??

Thanks for your HELPS
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top