hellllllllllllllllllllllllllllllllllllllp

[kenney408]

I have a panasonic kx tda 50 and a kx - tva 50. for example there is 4 co lines and on the phones there wouldnt be any button for a representative to pick up when there someone else on the phone. On the phone there a button to switch to another line to pick up the incoming call. So we press that ONE button and press # 2 to pick the incoming second CO line. How do we program the panasonic tda50 to do that...

thank you very much in advance.

 

[cwc3]

what type of telephone sets are you using were are you located?

 

[bigglesnz11]

If the TDA 50 is anything like the TDA100/200, I dont think it is that simple, from memory you have to dial a group pick up access and a 2 digit group number, not quite as simple as dial 2 for a night bell pick up.

 

[Trotski]

Get a professional to do this, you seem to be having a lot of difficulty understanding the processes.

 

[cwc3]

I am wondering were you got your equipment from you must
not have trained on any of this equipment .I can tell buy the questions you've been asking .....

 

[LkEErie]

I'm thinking the question needs to be translated to English and reposted. I can't figure out if he only has a 5 button set, or maybe just a single line set with 10 autodial keys.

LkE

 

[LkEErie]

A Panasonic TDA-50 is a horrible system to learn on, especially if you don't have the programming tool.

Your better bet would be a TAW-848 or an old TD family system. The TAW is like a TDA-50 without the digital features, but the programming is similar and you get the programming console.

 

[cwc3]

it has to be a usa system we are the only ones that call it
a 50