Ok so here's the idea , need more try ports on a 61. Here's the setup.
Version 25.15
Option 61
Msdl 8 group 0
Msdl 9 group 0
Msdl 10 group 0
Sdi cards as follows, 4 port qsdi paddle, msdl,msdl,
Tty 0 system monitor paddle port 0
Tty 1 seb and maint term paddle port 1
Tty 4 cdr (keeps blowing) paddle port 2(to be removed)
Tty 5 not assigned in cdb paddle port 3
Msdl 8-0 dch
Msdl 8-1 dch
Msdl 8-2 mm aml
Msdl 8-3 tty 8 monitoring device
Msdl 9-0 dch
Msdl 9-1 dch
Msdl 9-2
J21 cores 0-1 tty 14-15
Msdl 9-3 dch
So here is the thing, the 3rd mddl is set to ten, when I go to add a tty of any unused number 2,3,6,7,9,10,11,12,13 and enter type msdl it only comes up with the dnum of the tty I'm trying to add and port 0. Now here's the kicker, if I add tty 10 it puts it on dnum 10-0 and it works, but if I try and add try 11 which I would want on 10-1 it still shows dnum 11-0.
What am I not seeing here? No other Sdi,msdl,or qsdi in system.
Version 25.15
Option 61
Msdl 8 group 0
Msdl 9 group 0
Msdl 10 group 0
Sdi cards as follows, 4 port qsdi paddle, msdl,msdl,
Tty 0 system monitor paddle port 0
Tty 1 seb and maint term paddle port 1
Tty 4 cdr (keeps blowing) paddle port 2(to be removed)
Tty 5 not assigned in cdb paddle port 3
Msdl 8-0 dch
Msdl 8-1 dch
Msdl 8-2 mm aml
Msdl 8-3 tty 8 monitoring device
Msdl 9-0 dch
Msdl 9-1 dch
Msdl 9-2
J21 cores 0-1 tty 14-15
Msdl 9-3 dch
So here is the thing, the 3rd mddl is set to ten, when I go to add a tty of any unused number 2,3,6,7,9,10,11,12,13 and enter type msdl it only comes up with the dnum of the tty I'm trying to add and port 0. Now here's the kicker, if I add tty 10 it puts it on dnum 10-0 and it works, but if I try and add try 11 which I would want on 10-1 it still shows dnum 11-0.
What am I not seeing here? No other Sdi,msdl,or qsdi in system.