I am trying to load a license on a MD110 PBX BC11.The message i got is "path not found". On checking all directories i can only see DEV,SYS,etc and USR1 -USR6. No sub directory was found on USR1 & 2. I wanted to load in the LI directory in USR1.The PBX is still working though there is a red light blinking on the HDU and periodic dump has failed.I have also tried DUSYI but it fails too with the message "REL1 directory does not exist.My questions are:
1. What could have deleted the directories because they were there before.
2. If i have a Data.cmd file on PC-Regen,which was used for th upgrade of the PBX and i regenerate it to the PBX. Will all directories be automatically restored.If yes, what is the procedure?
Please note: I do not have off-site backup.
1. What could have deleted the directories because they were there before.
2. If i have a Data.cmd file on PC-Regen,which was used for th upgrade of the PBX and i regenerate it to the PBX. Will all directories be automatically restored.If yes, what is the procedure?
Please note: I do not have off-site backup.