HDU Card in LIM

[nitram11]

Hello, MD 110 Specialist;

i am user of BP 250; there are no experience with MD 110 up to this time; now we got two big old LIMs - I think, it will be called BC 7 or 8; one with power/charge and USV units, the other comes with the following cards:

ROF 131 4233/1 R1C LFU N9011 2Stk.
ROF 131 4233/1 R1C LFU N9103 10Stk.
ROF 137 5244/1 R3B ELU A21 9104 20Stk.
ROF 131 4602/3 R8C LPU 5 T01 1 Stk.
Lim Prozessor Unit
ROF 131 4309/2 R3A TRU 3 T01 1Stk.
ROF 137 5238/5 R2A TSU-T N9308 1Stk.
ROF 131 4414/4 R8B DSU T01 1Stk.
ROF 137 5215/1 R7A SIU A21 1Stk.
ROF 1314246/5 R3A GJUL 4 1Stk.
ROF 131 8331/5 R1B ELU 5 1Stk.
ROF 131 829/2 MPU T01 1Stk.
ROF 131 4234/1 R1A CCU A21 1Stk.
ROF 131 45007/1 R16B IPU T01 1Stk. Ein/Ausgabeschnittstelle V.24
ROF 131 4267/1A R2B LLO N9101 (Power) 2Stk.
ROF 131 708/2A R3B (Power) 1Stk.
BFB 101 002/1 R2B (Power) 1Stk.
ROF 131 991/1A R5B LLO (Power) 1Stk.
ROF 131 4227 3 R1A (Power) 1Stk.


Two Questions:
Which cards (and system-software?)are necessary to get this Lims to work generally? In this forum I heard that especielly a HDU Card is missing -

HOW can I find out, which Release or Form (BC 7, 8, 9?) this LIMS are? (white Metall cases with 6 cabinets

Thanks for your answers and excuse the bad english; Greetings from Germany

 

[lalrl]

1. LPU5 is ready for BC8, so the whole LIM should be BC8.
2. LSU is missing, without this card LIM will not work
3. HDU is indeed needed
4. ELU5 means, that only DBC25xx-Sets can be used

So update LPU5, look for a LSU, buy a NIU2 with Flash and then LIM is enabled for BC12. If you have a BC12-License - good for you. If not: BC9 is the best SW, but then with IPU/HDU.