HD-SCR

[dreb20]

Hi all,

anyone have same as mine. please see attached.
the problem is the last Backup is on june 14 2019. what is the problem did not backup ? theis is a possible to change from auto to manual backup? actually the Cf is not visible when i go to schedule. there is a connection of this thats why cant backup?

qeustion again.
how to restart unix on h4kv5 to make the CF being visible(already insert)? the connection from the IPDA will disconnect?

thanks
dreb

 

[donb01]

Have you tried a different CF card that you have used successfully before?

Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA

 

[dreb20]

HI donb
actually not. but when i try to manually backup by hdd to cf its working the problem is on the schedule only. btw thanks

 

[donb01]

It has been years since V5, but I know I had to have 2 different CF cards because the RMX backup had a different format than the Unix/ADM backup. You may just need to format the card for which backup you're trying to do. I know on mine I left the one card in all the time and ran regular weekly backups on it, and the other one I would swap out monthly and do the manual backup and then switch back to the other card (of course I kept multiples of each and still have an office envelope full of 2GB CF cards laying around somewhere)...

Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA