damocles13
Technical User
thread690-1394628
From CBB's previous post:
List trace station xxxx/x
An example would be list trace station 1234/7. This would activate button 1 on extension 1234.
Note: you have to add 6 to whatever button you want to press, button 1 is 7 button 24 is 30 etc…
I'm running CS1000M Ver 3621 R7
The listed commands are not producing the "desired" effects.
li trac st xxxx/x produces a TRA100 err code.
Will this work on my system? I noticed most people were referencing earlier systems. (and it has been a while since your original post).
And thanks for the original post, even though I just found it!
Give a man a fish and he will eat for a day.
Teach a man to fish and he will sit in a boat all day and drink beer!
From CBB's previous post:
List trace station xxxx/x
An example would be list trace station 1234/7. This would activate button 1 on extension 1234.
Note: you have to add 6 to whatever button you want to press, button 1 is 7 button 24 is 30 etc…
I'm running CS1000M Ver 3621 R7
The listed commands are not producing the "desired" effects.
li trac st xxxx/x produces a TRA100 err code.
Will this work on my system? I noticed most people were referencing earlier systems. (and it has been a while since your original post).
And thanks for the original post, even though I just found it!
Give a man a fish and he will eat for a day.
Teach a man to fish and he will sit in a boat all day and drink beer!