I had rebooted one of my servers yesterday and ever since I have not been able to see the server through my rconsole program. I was wondering if there was anything that didn't load during reboot or is there something that I must do to see the server. I am running Novell 5.1. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
having trouble viewing server through rconsole
- Thread starter cderow
- Start date
In your AUTOEXEC.NCF, ensure that the following commands are loaded:
LOAD REMOTE password
LOAD RSPX
You can also configure this via INETCFG.
As a tester, at the server console type MODULES REMOTE to see if REMOTE is loaded, and MODULES RSPX to see if RSPX is loaded. If not, load the above lines manually and ensure they are in the AUTOEXEC.NCF for when you reboot next -----------------------------------------------------
"It's true, its damn true!"
-----------------------------------------------------
LOAD REMOTE password
LOAD RSPX
You can also configure this via INETCFG.
As a tester, at the server console type MODULES REMOTE to see if REMOTE is loaded, and MODULES RSPX to see if RSPX is loaded. If not, load the above lines manually and ensure they are in the AUTOEXEC.NCF for when you reboot next -----------------------------------------------------
"It's true, its damn true!"
-----------------------------------------------------
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question