Having problems upgrading with image

[ForumKid]

HI,

Im trying to upgrade from 5.0(3) to 6.0(1). This is for my failover PIX. I think I have to upgrade to 5.1(5) and then 5.2(5) and then finally 6.0(1). The problem is that my images are corrupt I think. I boot the PIX off the floppy. It says booting floppy. Then executing flop...Then goes back to booting floppy, etc. Can anyone help me with this. I no longer have cisco support. I cant get new images.
Where I can go to download new images that I need.
Thanks

 

[nib]

Hi

Recently I tryed to upgrade a PIX...
PixOS 5.0 booting only of floppy.
And...
PIX Software version 4.4(x) - 2 MB Flash, 16 MB RAM
PIX Software version 5.0(x) - 2 MB Flash, 32 MB RAM
PIX Software version 5.1(x) - 2 MB Flash, 32 MB RAM
PIX Software version 5.2(x) - 8 MB Flash, 32 MB RAM
PIX Software version 5.3(x) - 8 MB Flash, 32 MB RAM
PIX Software version 6.0(x) - 8 MB Flash, 32 MB RAM
PIX Software version 6.1(x) - 8 MB Flash, 32 MB RAM
PIX Software version 6.2(x) - 8 MB Flash, 32 MB RAM
It can be your problem.

 

[ForumKid]

Hi,
Im not sure what you mean that it can be my problem.
This is a little more information about my pix that iM trying to upgrade:

Cisco Secure PIX Firewall Version 5.0(3)
Compiled on Sun 23-Jan-00 21:59 by pixbuild
Finesse Bios V3.3
pixfirewall up 8 secs
Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 349 MHz
Flash AT29C040A @ 0x300
BIOS Flash AM28F256 @ 0xfffd8000
Licensed connections: 65536
pixfirewall# show flash
flash file system: version:1 magic:0x12345679
file 0: origin: 0 length:1376312
file 1: origin: 573952 length:0
file 2: origin: 0 length:0
file 3: origin: 2096640 length:140
pixfirewall#

Either way does anyone have pix601.bin? Mine is all corrupt and cisco will not give it to me. Is there a way to get the OS upgrade off my primary pix since its runnning 6.0(1)? But Im still having issues. Is there anyone here that can help...

 

[ForumKid]

Hi,
Can someone recommend another forum to go to since noone here can help. Im not a pix person so Im not sure what other web sites have a great pix forum.

THanks

 

[nib]

Hi

You have problem with flash...
You can upgrade to Cisco Secure PIX Firewall Version 5.1(5)
and you will see that:

Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 349 MHz
Flash AT29C040A @ 0x300, 2MB <== here is

It's maximim that you may have with flash 2MB

 

[nib]

You can take images there:

http://proxy.chelinvest.ru/PiX

Only... The speed is very bad.
Try...