Having a problem with Full DHCP on an I2004 1

[atascoman]

I can get the phone to pull an IP and work using partial DHCP, but when I set it to Full DHCP it hangs at the Starting DHCP prompt. I have option 128 setup in myy DHCP server. This is a lab, so this is the only phone I have right now, so I am unable to test with another set.

My option 128 is set to:

Nortel-i2004-A,192.168.1.100:7000,1,5;192.168.1.100:7000,1,5

I'm not doing anything with VLAN at the moment so i have not configure option 191 and have the phone set to no VLAN. The phone is connecting to a BCM50 v1.0 with all the patches.

 

[biv343]

Not sure if it's a typo in your post or not, but do you have a period at the end of the string in your DHCP server? If there isn't a period there, it won't work properly.

 

[atascoman]

No, I didn't put a period in. Thanks for catching that.

 

[atascoman]

That fixed it.