netadmin06
MIS
Hello , I have a network of about 80 computers in a huge building....there is network wiring with RJ-45 jacks around the whole building...all the wires from all the rj-45's go to one main linksys switch SRW2048.....also attacehd to that switch i have an linksys access point WAP54G....i have wireless laptops that attach to the network using the access point........problem is that there is a room far from the access point where the laptops get a very weak signal...so i purchased another access point (same model) ...now should i configure that as an access point? acces point clint? a bridge??.....and should i connnect that second access point to the rj-45 that the room has which goes to the switch??