Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Have you tried the Calling Profiles in PGM128?

Status
Not open for further replies.

doktor

IS-IT--Management
Dec 3, 2003
3,841
DK
A very good an new feature in version 3.9 for the ipLDK-20/100/300 is the Calling Profiles.

Did you have the chance to test it out?

Description
This function provides many flexibility of call re-routing.
If user is not in office, user is in another place, user can get the call by pre-programmed call profile table.
If user is busy state, or DND state, incoming call can be routed by call profile table too.
Each station has its 3 call profile tables (table 1(BIN 001) ~ table 3(BIN 003)), and each profile table have 3
destinations.
In PGM 128, user can configure Call Profile Table.
Each table composed of Destination and No answer time.
Each table has call profile activation option.
User can choose one Call Profile Table of three tables by this activation option.
If one Call Profile activation option is set to ON, incoming call can routed by this Call Profile table.
By each call profile table, [Multiple Automatic Call Forward] can be served.



///doktor
 
Thanks doktor - very useful information

(There is a similar feature on the IPECS)

Regards
Steve
 
The idea of "Calling Profiles" has been re-used from another PBX-brand (large scale), but this important feature was important also to have in smller scale PBX'es.

///doktor
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top