Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Have to dial a 1 for local calls on BCM450
- Thread starter tprens
- Start date
ironhorse17
Technical User
What type of lines are you using to dial?
Do you get dial tone on itcm 9 or 91?
Using a butt set on a line do you have to dial 9 + 1?
Do you get dial tone on itcm 9 or 91?
Using a butt set on a line do you have to dial 9 + 1?
- Thread starter
- #3
T1 line coming in.
we get a dial tone just on line pickup before 9 and 1.
When I dial a local number not using the 1 it comes back with a phone system recording as "your call can not be completed as dialed please check the number and dail again" which sounds like a verizon issue. This wasnt the issue before I had the harddrive melt down. I'm perplexed...
we get a dial tone just on line pickup before 9 and 1.
When I dial a local number not using the 1 it comes back with a phone system recording as "your call can not be completed as dialed please check the number and dail again" which sounds like a verizon issue. This wasnt the issue before I had the harddrive melt down. I'm perplexed...
ironhorse17
Technical User
Maybe it was that way before and the system was absorbing the 1 for certain area codes.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
