Has anyone used WinSCP to access the IPO 500v2 SD Card? 4

[tac84]

I know you can access the SD card by using Internet Explorer w/java & Web Manager to upload files to the SD Card, or take the SD Card out and put it in a computer, but just wondering if anyone has successfully used a program such as WinSCP to bulk upload phone firmware files to their SD Card? If so, which settings did you use (Session file protocol/Port) to access it?

Thanks, Tim
Adelaide, Australia

 

[Okkie26]

Why would you do that as you can use IP Office manager to upload files?

 

[tac84]

@Okkie26 - complete mental blank - of course. Thank you!

Thanks, Tim
Adelaide, Australia

 

[derfloh]

Not possible to use any other software.

IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN

 

[tac84]

Thanks for clarifying everyone. I completely forgot you can access embedded file management via IPO Manager.

Happy New Year. Stay safe!


Thanks, Tim
Adelaide, Australia

 

[critchey]

Honestly as slow as embedded file management uploads files it would be nice if something else did work just to see if it went faster or the limitation is the SD card.

The truth is just an excuse for lack of imagination.

 

[Okkie26]

I don't think the sd card is the limit, because when you put it in your laptop and upload it from there, it's much faster.

 

[derfloh]

I think the IP500 and perhaps the connection between LAN interface and SD-Card file system is the limit. If it wasn’t the IP500 would be able to provide the files for K-Series phones as well.

IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN

 

[BFG9K]

TFTP is the limiting factor with IP Office File Management transfer speed. Phones use HTTP to download firmware which is much faster.

Cheers,
BFG9K
Avaya IPO/ACCS Technician
Melbourne, Australia