Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Has anyone seem this error in log file? Try to start Check and Posting service for the 3 time

Status
Not open for further replies.

IMV8N

Systems Engineer
Oct 20, 2021
5
0
0
US
I am troubleshooting a workstation where service host keeps crashing during the load. I pulled the log and there are three lines that are interestign to me. I was wondering if anyone else has come across these log messages? This is not a CAPs machine nor is it set as a backup CAPs. Then the message below stating that LOcalDb and CPServiceDb is not ready. Any suggestion on why this error would be thrown?

11/01/22 13:15:14.992, 0, 0,EGatewayHand, 6,Try to start Check and Posting service for the 3 time,
11/01/22 13:15:14.992, 0, 0,EGatewayHand, 6,[Check and Posting service not configured to run here],
11/01/22 13:15:24.996, 0, 0,EGatewayHand, 6,Cannot notify WSs of failure to start Check Posting Service,



11/01/22 13:15:35.174, 0, 0,LoadHandlers, 5,***** Device Information Handler: Host process is ServiceHost.exe. Initializing handler for collecting device info...,
11/01/22 13:15:35.178, 0, 0,LoadHandlers, 5,***** Device Information Metrics: WebConfig Path: C:\Micros\Simphony\WebServer\11/01/22 13:15:35.180, 0, 0,LoadHandlers, 17,ExtensibilityServicesList: Database LocalDb is not ready,
11/01/22 13:15:35.180, 0, 0,LoadHandlers, 17,ExtensibilityServicesList: Database CPServiceDb is not ready,
11/01/22 13:15:35.180, 0, 0,LoadHandlers, 17,ReadExtensionAppsJob: unable to initialize: will try again later,
11/01/22 13:15:45.202, 0, 0,LoadHandlers, 5,***** Device Information Handler: InitHandler mHostIsServiceHost: True‚ serviceHostID: 1128‚ mServiceType: 7,
11/01/22 13:15:45.220, 0, 0,LoadHandlers, 5,***** Device Information Handler: initialized successfully‚ stopping job,
 
Is this a new installation with a new db? Check the servicehost.xml check which workstation is caps on that file , try to recal the machine
 
Try to drop the database and change the password to normal then recal the caps


Net stop MSSQL$SQLEXPRESS
Net start MSSQL$SQLEXPRESS /f /mSQLCMD
SQLCMD -S localhost\sqlexpress
ALTER LOGIN [sa] WITH PASSWORD=N'mymicros', CHECK_POLICY = OFF
ALTER LOGIN SA ENABLE
ALTER LOGIN [datastoredb] WITH PASSWORD=N'datastoredb', CHECK_POLICY = OFF
ALTER LOGIN datastoredb ENABLE
GO
Exit
NET STOP MSSQL$SQLEXPRESS
NET START MSSQL$SQLEXPRESS
SQLCMD -U sa -P mymicros -S localhost\sqlexpress


ALTER LOGIN <sa> ENABLE;
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top