Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hardwire loopback

Status
Not open for further replies.
Johnnmeg

Johnnmeg

IS-IT--Management
Oct 25, 2000
3
0
0
US
Can anyone tell me how to loopback a 4 wire 56k ckt?
I think you have to tie the two transmits together and tie the two recieves together but am not sure....any help would be appreciated.
 
Sort by date Sort by votes
What are you doing this for ,Then maybe an answer would be eaisier to find .If its 56k then I guess its analouge?
 
Upvote 0 Downvote
Easiest way to make a loopback for almost any circuit is to take a jack and bridge 1 length of cross connect over the blue, orange, green, brown pairs. When all pairs are jumpered, you'll get your loopback.

b/w, o/w, g/w, b/w all tied together.
w/b, w/o, w/g, w/b all tied together. -CL
 
Upvote 0 Downvote
1. Switched 56K service is digital.
2. Transmit goes to receive to loopback a signal.
3. Chances are better for you if you use the loopback feature of the terminating hardware which receives this circuit at your location.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Manueljung
  • Locked
  • Question
convert hardwired phone to modular 1
Replies
5
Views
41
Manueljung
Manueljung

Part and Inventory Search

Sponsor

Back
Top