Hardware question

[Labash]

We have a Octel model #0250 and I am trying to find some literature on the LED status of the cards.
We have a CCF card
044-2541-001 Faxline/TIC-N
Master card (has reset and LED Test buttons)

If someone has a link for info on these cards and the LED's I would appreciate it.
Thanks!

 

[KenMeans]

http://support.avaya.com/japple/css...oductID=107796&temp.releaseID=129784&x=5&y=12

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

 

[Labash]

Thanks Ken. I find these Octel doc's difficult to navigate.
What manual has basic slot layout and basic programming like port assignments and which slot they correspond with. If I put an FLT card in slot 3 what port assignments are these?

 

[KenMeans]

they would be 3a to 3h if the system has a lic for that many ports. What is it you are trying to do?

You may want to hire someone like us to help you.

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

 

[Labash]

Just add another card. Right now there is an FLT in slot 2 but the ports are programmed on 1A-1H.

 

[KenMeans]

my mistke then it would be 2a to 2h if you are licensed for 8 more ports

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)